10 HP Electric Motor

Showing all 20 results

CT3-CI-TO-215T-4-B-D-10, 10 HP, 208-230/460V, 4P, TEAO, Foot Mounted, Cast Iron, 215T Frame, TECHTOP NEMA Premium Eff. Cooling Tower Motor
CT3-CI-TO-215T-4-B-D-10, 10 HP, 208-230/460V, 4P, TEAO, Foot Mounted, Cast Iron, 215T Frame, TECHTOP NEMA Premium Eff. Cooling Tower Motor
Special Features:
  • Moisture resistant Stator Insulator Coating
  • Drain provisions for All mounting positions
  • Totally Enclosed Air Over Enclosure (TEAO)
  • All direction Conduit box drain provisions
  • Dual Oversized Sealed Bearings
  • Bearing Retainer Gaskets Installed• Silicone Sealed End Bells
  • 2 Part Epoxy Top coat Sealant
  • Lead Seal Conduit Box Gasket
  • Space Heaters Installed
  • Tapped Shaft for Vertical Lifting
  • Stainless Steel Hardware
  Standard Features:
  • NEMA Premium Efficiency Rating
  • Inverter Rated - 1000:1 Variable Torque
  • MG 1 Part 31 Compliant for VFD use
  • IP 55 Protection - 40°C Ambient Rating
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multi mount Removable Feet through 326T
  • One-Way Auto-purge Brass Condensation Drains
  • 1.25 Service Factor to 50HP (1.15 SF above 50 HP)
  • Conduit Box is 90° Rotatable
  • Double Lip Shaft Seal on DE & ODE
  • VPI Lap wound Stator with Tropicalization Coating
  • Rubber Slinger on Shaft
  • C & D Flanges Available upon request
  • Available in TEFC enclosure upon request
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertible up to 326T ( Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty from Purchase Date
$1,807.00 Read more
GR3-AL-TF-132MB3-4-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base Foot Mounted, Cast Aluminum, 132M Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
GR3-AL-TF-132MB3-4-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base Foot Mounted, Cast Aluminum, 132M Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
  • IP 55 Rated Ingress Protection
  • Inverter Rated-15:1 Constant Torque (MG1 Part 31)
  • Double Lip Bearing Seal on DE & ODE
  • VPI Lap Wound Stator with Tropicalization
  • Dual Oversized Bearing on DE & ODE
  • Multi-mount Removable Feet
  • Corrosion Resistant Hardware
  • Rubber Slinger Protection on Drive End
  • Conduit Box is 90° Rotatable
  • Zerk Regreasable Bearings 160 Frame & Larger
  • F1, F2, F3 Field Convertible
  • Class H Insulated Stator with Class F Leads
  • Terminal Blocks between Conduit Box & Body
  • Increase & Decrease Flanges Available
  • One-Way Brass Condensation Drain on DE & ODE
  • Class 1, Division 2, Groups A, B, C & D Compliant
  • 36 Month Warranty
$2,885.00 Add to cart
GR3-AL-TF-132MB34-4-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base B14 Flange, Cast Aluminum, 132M Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
GR3-AL-TF-132MB34-4-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base B14 Flange, Cast Aluminum, 132M Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
  • IP 55 Rated Ingress Protection
  • Inverter Rated-15:1 Constant Torque (MG1 Part 31)
  • Double Lip Bearing Seal on DE & ODE
  • VPI Lap Wound Stator with Tropicalization
  • Dual Oversized Bearing on DE & ODE
  • Multi-mount Removable Feet
  • Corrosion Resistant Hardware
  • Rubber Slinger Protection on Drive End
  • Conduit Box is 90° Rotatable
  • Zerk Regreasable Bearings 160 Frame & Larger
  • F1, F2, F3 Field Convertible
  • Class H Insulated Stator with Class F Leads
  • Terminal Blocks between Conduit Box & Body
  • Increase & Decrease Flanges Available
  • One-Way Brass Condensation Drain on DE & ODE
  • Class 1, Division 2, Groups A, B, C & D Compliant
  • 36 Month Warranty
$1,742.00 Read more
GR3-AL-TF-132MB35-4-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base B5 Flange, Cast Aluminum, 132M Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
GR3-AL-TF-132MB35-4-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base B5 Flange, Cast Aluminum, 132M Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
  • IP 55 Rated Ingress Protection
  • Inverter Rated-15:1 Constant Torque (MG1 Part 31)
  • Double Lip Bearing Seal on DE & ODE
  • VPI Lap Wound Stator with Tropicalization
  • Dual Oversized Bearing on DE & ODE
  • Multi-mount Removable Feet
  • Corrosion Resistant Hardware
  • Rubber Slinger Protection on Drive End
  • Conduit Box is 90° Rotatable
  • Zerk Regreasable Bearings 160 Frame & Larger
  • F1, F2, F3 Field Convertible
  • Class H Insulated Stator with Class F Leads
  • Terminal Blocks between Conduit Box & Body
  • Increase & Decrease Flanges Available
  • One-Way Brass Condensation Drain on DE & ODE
  • Class 1, Division 2, Groups A, B, C & D Compliant
  • 36 Month Warranty
$1,888.00 Read more
GR3-AL-TF-132SB3-2-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 2P (3600 RPM), TEFC, Rigid Base Foot Mounted, Cast Aluminum, 132S Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
GR3-AL-TF-132SB3-2-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 2P (3600 RPM), TEFC, Rigid Base Foot Mounted, Cast Aluminum, 132S Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
  • IP 55 Rated Ingress Protection
  • Inverter Rated-15:1 Constant Torque (MG1 Part 31)
  • Double Lip Bearing Seal on DE & ODE
  • VPI Lap Wound Stator with Tropicalization
  • Dual Oversized Bearing on DE & ODE
  • Multi-mount Removable Feet
  • Corrosion Resistant Hardware
  • Rubber Slinger Protection on Drive End
  • Conduit Box is 90° Rotatable
  • Zerk Regreasable Bearings 160 Frame & Larger
  • F1, F2, F3 Field Convertible
  • Class H Insulated Stator with Class F Leads
  • Terminal Blocks between Conduit Box & Body
  • Increase & Decrease Flanges Available
  • One-Way Brass Condensation Drain on DE & ODE
  • Class 1, Division 2, Groups A, B, C & D Compliant
  • 36 Month Warranty
$2,696.00 Add to cart
GR3-AL-TF-132SB34-2-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 2P (3600 RPM), TEFC, Rigid Base B14 Flange, Cast Aluminum, 132S Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
GR3-AL-TF-132SB34-2-B-D-10, 10 HP, 7.5 kW, 208-230/460V, 2P (3600 RPM), TEFC, Rigid Base B14 Flange, Cast Aluminum, 132S Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
  • IP 55 Rated Ingress Protection
  • Inverter Rated-15:1 Constant Torque (MG1 Part 31)
  • Double Lip Bearing Seal on DE & ODE
  • VPI Lap Wound Stator with Tropicalization
  • Dual Oversized Bearing on DE & ODE
  • Multi-mount Removable Feet
  • Corrosion Resistant Hardware
  • Rubber Slinger Protection on Drive End
  • Conduit Box is 90° Rotatable
  • Zerk Regreasable Bearings 160 Frame & Larger
  • F1, F2, F3 Field Convertible
  • Class H Insulated Stator with Class F Leads
  • Terminal Blocks between Conduit Box & Body
  • Increase & Decrease Flanges Available
  • One-Way Brass Condensation Drain on DE & ODE
  • Class 1, Division 2, Groups A, B, C & D Compliant
  • 36 Month Warranty
$3,209.00 Add to cart
GR3-AL-TF-132SB35-2-B-D-10, 10 HP, 5.5 kW, 208-230/460V, 2P (3600 RPM), TEFC, Rigid Base B5 Flange, Cast Aluminum, 132S Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
GR3-AL-TF-132SB35-2-B-D-10, 10 HP, 5.5 kW, 208-230/460V, 2P (3600 RPM), TEFC, Rigid Base B5 Flange, Cast Aluminum, 132S Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
  • IP 55 Rated Ingress Protection
  • Inverter Rated-15:1 Constant Torque (MG1 Part 31)
  • Double Lip Bearing Seal on DE & ODE
  • VPI Lap Wound Stator with Tropicalization
  • Dual Oversized Bearing on DE & ODE
  • Multi-mount Removable Feet
  • Corrosion Resistant Hardware
  • Rubber Slinger Protection on Drive End
  • Conduit Box is 90° Rotatable
  • Zerk Regreasable Bearings 160 Frame & Larger
  • F1, F2, F3 Field Convertible
  • Class H Insulated Stator with Class F Leads
  • Terminal Blocks between Conduit Box & Body
  • Increase & Decrease Flanges Available
  • One-Way Brass Condensation Drain on DE & ODE
  • Class 1, Division 2, Groups A, B, C & D Compliant
  • 36 Month Warranty
$3,612.00 Add to cart
RD1-RS-TF-215T-4-B-C-10, 10 HP, 230V, 4P (1800 RPM), TEFC, Rolled Steel, 215T Frame, Rigid Base, Foot Mounted TECHTOP High Torque Single Phase AC Motor
RD1-RS-TF-215T-4-B-C-10, 10 HP, 230V, 4P (1800 RPM), TEFC, Rolled Steel, 215T Frame, Rigid Base, Foot Mounted TECHTOP High Torque Single Phase AC Motor
Standard Features
  • Manual Reset Protectors
  • High Efficiency Dual Cap Design
  • High Quality Molded Gaskets
  • Over 300% Starting Torque
  • Cast Iron End Bells
  • Dual Oversized Ball Bearings
  • Dependable Mechanical Starting Switch
  • 18 Month Warranty
$1,463.00 Add to cart
RD1-RS-TF-215TC-4-B-C-10, 10 HP, 230V, 4P (1800 RPM), TEFC, Rolled Steel, 215TC Frame, C-Face with Base, TECHTOP High Torque Single Phase AC Motor
RD1-RS-TF-215TC-4-B-C-10, 10 HP, 230V, 4P (1800 RPM), TEFC, Rolled Steel, 215TC Frame, C-Face with Base, TECHTOP High Torque Single Phase AC Motor
Standard Features
  • Manual Reset Protectors
  • High Efficiency Dual Cap Design
  • High Quality Molded Gaskets
  • Over 300% Starting Torque
  • Cast Iron End Bells
  • Dual Oversized Ball Bearings
  • Dependable Mechanical Starting Switch
  • 18 Month Warranty
$1,551.00 Add to cart
WX3-AL-TF-215T-2-B-D-10, 10 HP, 208-230/460V, 2P (3600 RPM), TEFC, Foot Mounted, Cast Aluminum, 215T Frame, TECHTOP Washdown Duty Electric Motor
WX3-AL-TF-215T-2-B-D-10, 10 HP, 208-230/460V, 2P (3600 RPM), TEFC, Foot Mounted, Cast Aluminum, 215T Frame, TECHTOP Washdown Duty Electric Motor
Standard Features:
  • IP 56 Rated Protection
  • 50/60 Hz Capable
  • 1.15 Service Factor
  • 9 Lead Dual Voltage
  • Fully Potted Conduit Entry
  • Double Lip Oil Seals on DE & ODE
  • Inverter Rated 15:1 Constant Torque for VFD use
  • Multi-mount Removable Feet
  • F1, F2, F3 Field Convertible (Shipped F1)
  • Class F Insulation System ( Class H Stator)
  • One-Way Brass Condensation Drains on DE & ODE
  • Designed to Class B Temperature Rise
  • Drive End Bearing Locks
  • VPI Insulated Windings
  • EISA Compliant
  • 24 Month Warranty
$1,541.00 Add to cart
WX3-AL-TF-215T-4-B-D-10, 10 HP, 208-230/460V, 4P (1800 RPM), TEFC, Foot Mounted, Cast Aluminum, 215T Frame, TECHTOP Washdown Duty Electric Motor
WX3-AL-TF-215T-4-B-D-10, 10 HP, 208-230/460V, 4P (1800 RPM), TEFC, Foot Mounted, Cast Aluminum, 215T Frame, TECHTOP Washdown Duty Electric Motor
Standard Features:
  • IP 56 Rated Protection
  • 50/60 Hz Capable
  • 1.15 Service Factor
  • 9 Lead Dual Voltage
  • Fully Potted Conduit Entry
  • Double Lip Oil Seals on DE & ODE
  • Inverter Rated 15:1 Constant Torque for VFD use
  • Multi-mount Removable Feet
  • F1, F2, F3 Field Convertible (Shipped F1)
  • Class F Insulation System ( Class H Stator)
  • One-Way Brass Condensation Drains on DE & ODE
  • Designed to Class B Temperature Rise
  • Drive End Bearing Locks
  • VPI Insulated Windings
  • EISA Compliant
  • 24 Month Warranty
$1,554.00 Add to cart
WX3-AL-TF-215TC-2-B-D-10, 10 HP, 208-230/460V, 2P (3600 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 215TC Frame, TECHTOP Washdown Duty Electric Motor
WX3-AL-TF-215TC-2-B-D-10, 10 HP, 208-230/460V, 2P (3600 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 215TC Frame, TECHTOP Washdown Duty Electric Motor
Standard Features:
  • IP 56 Rated Protection
  • 50/60 Hz Capable
  • 1.15 Service Factor
  • 9 Lead Dual Voltage
  • Fully Potted Conduit Entry
  • Double Lip Oil Seals on DE & ODE
  • Inverter Rated 15:1 Constant Torque for VFD use
  • Multi-mount Removable Feet
  • F1, F2, F3 Field Convertible (Shipped F1)
  • Class F Insulation System ( Class H Stator)
  • One-Way Brass Condensation Drains on DE & ODE
  • Designed to Class B Temperature Rise
  • Drive End Bearing Locks
  • VPI Insulated Windings
  • EISA Compliant
  • 24 Month Warranty
$1,674.00 Add to cart
WX3-AL-TF-215TC-4-B-D-10, 10 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 215TC Frame, TECHTOP Washdown Duty Electric Motor
WX3-AL-TF-215TC-4-B-D-10, 10 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 215TC Frame, TECHTOP Washdown Duty Electric Motor
Standard Features:
  • IP 56 Rated Protection
  • 50/60 Hz Capable
  • 1.15 Service Factor
  • 9 Lead Dual Voltage
  • Fully Potted Conduit Entry
  • Double Lip Oil Seals on DE & ODE
  • Inverter Rated 15:1 Constant Torque for VFD use
  • Multi-mount Removable Feet
  • F1, F2, F3 Field Convertible (Shipped F1)
  • Class F Insulation System ( Class H Stator)
  • One-Way Brass Condensation Drains on DE & ODE
  • Designed to Class B Temperature Rise
  • Drive End Bearing Locks
  • VPI Insulated Windings
  • EISA Compliant
  • 24 Month Warranty
$1,687.00 Add to cart
BK3-CI-TF-256T-6-BR-G-10, 10 HP, 230/460/796V, 6 Pole (1200 RPM Nominal Speed), TEFC, 1.15 SF, 256T Frame, regreasable ball bearings, cast iron, foot mounted, rigid base, High Slip Design D, AC induction motor
BK3-CI-TF-256T-6-BR-G-10, 10 HP, 230/460/796V, 6 Pole (1200 RPM Nominal Speed), TEFC, 1.15 SF, 256T Frame, regreasable ball bearings, cast iron, foot mounted, rigid base, High Slip Design D, AC induction motor
Standard Features
  • 5% - 8% Slip NEMA Design “D” Operation
  • Double Lip Oil Seals on Both Ends
  • Cast Iron Terminal Box with Gasket
  • Roller Bearing on 404T and Above
  • TEFC Cast Iron Frame
  • Corrosion Resistant Hardware
  • Vacuum Impregnated Stator
  • Mounting Position Convertible F1, F2, F3
  • Class F Insulation System , Class H Stator
  • Tropicalization on Stator Winding
  • One-Way Brass Condensation Drains
  • 24 Month Warranty from Date of Purchase
$1,686.00 Add to cart
215T Medium
GR3-CI-TF-215T-2-B-D-10, 10 HP, 208-230/460V, 2P (3600 RPM), TEFC, Foot Mounted, Cast Iron, 215T Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
  • Inverter Rated - 15:1 Constant Torque
  • MG 1 Part 31 Compliant for VFD use
  • IP 55 Protection - 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multi mount Removable Feet through 326T
  • One-Way Brass Condensation Drain
  • 1.25 Service Factor to 50HP (1.15 for larger frames)
  • Zerk Regreasable Bearings 254T & Larger
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seal on DE & ODE
  • IVacuum Pressure Impregnated Varnish
  • Tropicalization Winding Protection
  • Nipple Seals Between Conduit Box & Body
  • Rubber Slinger
  • C & D Flanges Available
  • Cast Iron Fan Covers Available on 364T & up
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertible ( Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty from Purchase Date
$1,150.00 Add to cart
215T Medium
GR3-CI-TF-215T-4-B-D-10, 10 HP, 208-230/460V, 4P (1800 RPM), TEFC, Foot Mounted, Cast Iron, 215T Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
  • Inverter Rated - 15:1 Constant Torque
  • MG 1 Part 31 Compliant for VFD use
  • IP 55 Protection - 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multi mount Removable Feet through 326T
  • One-Way Brass Condensation Drain
  • 1.25 Service Factor to 50HP (1.15 for larger frames)
  • Zerk Regreasable Bearings 254T & Larger
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seal on DE & ODE
  • IVacuum Pressure Impregnated Varnish
  • Tropicalization Winding Protection
  • Nipple Seals Between Conduit Box & Body
  • Rubber Slinger
  • C & D Flanges Available
  • Cast Iron Fan Covers Available on 364T & up
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertible ( Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty from Purchase Date
$1,163.00 Add to cart
Placeholder
GR3-CI-TF-215TC-2-B-D-10, 10 HP, 208-230/460V, 2P (3600 RPM), TEFC, C-Flange Mounted, Cast Iron, 215TC Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
  • Inverter Rated - 15:1 Constant Torque
  • MG 1 Part 31 Compliant for VFD use
  • IP 55 Protection - 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multi mount Removable Feet through 326T
  • One-Way Brass Condensation Drain
  • 1.25 Service Factor to 50HP (1.15 for larger frames)
  • Zerk Regreasable Bearings 254T & Larger
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seal on DE & ODE
  • IVacuum Pressure Impregnated Varnish
  • Tropicalization Winding Protection
  • Nipple Seals Between Conduit Box & Body
  • Rubber Slinger
  • C & D Flanges Available
  • Cast Iron Fan Covers Available on 364T & up
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertible ( Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty from Purchase Date
$1,283.00 Add to cart
215TC-Medium
GR3-CI-TF-215TC-4-B-D-10, 10 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Iron, 215TC Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
  • Inverter Rated - 15:1 Constant Torque
  • MG 1 Part 31 Compliant for VFD use
  • IP 55 Protection - 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multi mount Removable Feet through 326T
  • One-Way Brass Condensation Drain
  • 1.25 Service Factor to 50HP (1.15 for larger frames)
  • Zerk Regreasable Bearings 254T & Larger
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seal on DE & ODE
  • IVacuum Pressure Impregnated Varnish
  • Tropicalization Winding Protection
  • Nipple Seals Between Conduit Box & Body
  • Rubber Slinger
  • C & D Flanges Available
  • Cast Iron Fan Covers Available on 364T & up
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertible ( Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty from Purchase Date
$1,296.00 Add to cart
256T Medium
GR3-CI-TF-256T-6-BR-D-10, 10 HP, 208-230/460V, 6P (1200 RPM), TEFC, Foot Mounted, Cast Iron, 256T Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
  • Inverter Rated - 15:1 Constant Torque
  • MG 1 Part 31 Compliant for VFD use
  • IP 55 Protection - 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multi mount Removable Feet through 326T
  • One-Way Brass Condensation Drain
  • 1.25 Service Factor to 50HP (1.15 for larger frames)
  • Zerk Regreasable Bearings 254T & Larger
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seal on DE & ODE
  • IVacuum Pressure Impregnated Varnish
  • Tropicalization Winding Protection
  • Nipple Seals Between Conduit Box & Body
  • Rubber Slinger
  • C & D Flanges Available
  • Cast Iron Fan Covers Available on 364T & up
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertible ( Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty from Purchase Date
$1,900.00 Add to cart
256TC-Medium
GR3-CI-TF-256TC-6-BR-D-10, 10 HP, 208-230/460V, 6P (1200 RPM), TEFC, C-Flange Mounted, Cast Iron, 256TC Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
  • Inverter Rated - 15:1 Constant Torque
  • MG 1 Part 31 Compliant for VFD use
  • IP 55 Protection - 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multi mount Removable Feet through 326T
  • One-Way Brass Condensation Drain
  • 1.25 Service Factor to 50HP (1.15 for larger frames)
  • Zerk Regreasable Bearings 254T & Larger
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seal on DE & ODE
  • IVacuum Pressure Impregnated Varnish
  • Tropicalization Winding Protection
  • Nipple Seals Between Conduit Box & Body
  • Rubber Slinger
  • C & D Flanges Available
  • Cast Iron Fan Covers Available on 364T & up
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertible ( Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty from Purchase Date
$2,050.00 Add to cart