2 HP 1800 RPM Electric Motor
Showing 1–20 of 21 results
BL3-AL-TF-56C-4-B-D-2, 2 HP (1800 RPM), 208-230/460V, 4P, TEFC, C-Flange Mounted, Cast Aluminum, 56C Frame, TECHTOP Electric Motor
Standard Features
- Inverter Rated - 4:1 Constant Torque
- IP 55 Protection Rated
- Multi mount Removable Feet
- 50/60 Hz Capable
- One-Way Brass Condensation Drain
- 1.15 Service Factor
- Conduit Box is 90° Rotatable
- Double Lip Oil Seals on DE & ODE
- Vacuum Impregnated Winding
- 9 Lead Dual Voltage
- Drive End Bearing Locks
- Class F Insulation System with Class H Stator
- F1, F2, F0 Field Convertible ( Shipped F1)
- Designed to Class B Temperature Rise
- 24 Month Warranty
BL3-RS-OP-56H-4-B-D-2-RS, 2 HP, 208-230/460V, 4P (1800 RPM), ODP, Rolled Steel, 56H Frame, TECHTOP HVAC AC Motor
Check for Product Availability by email (sales@temasysinc.com) or by telephone (716) 434-8694 prior to checkout.
Standard Features
- Belt Drive - Resilient Cradle
- CSA Approved
- High Start Torque
- Sealed Ball Bearings
- Open Drip Proof
- High Efficiency
- 1725 RPM
- 40° C Ambient Temp Rating
- Class F Insulation
- 18 Month Warranty
CB3-AL-TF-56HC-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 56C Frame, TECHTOP Cobra Line, NEMA Premium Eff. Motor
Standard Features
- Shaft Grounding Brush Installed
- Fully Epoxy Potted Conduit Box Entry
- Stainless Steel Anti-Corrosion Fan Cover
- Brake Kit & Encoder Kit Ready
- PTC Thermal Protection Installed
- Multi-mount Removable feet F1, F2, F0 convertible
- 25 Service Factor with 60Hz TEFC operation
- Conduit Box 90° rotatable
- Full Die-Cast Aluminum Frame
- Anti-microbial (tropicalization) coating on stator
- Over sized shielded bearings
- Viton Double Lip Shaft Seal
- TENV Capable at 1.0 SF
- 1045 steel shaft
- Stainless steel nameplate
- Corrosion resistant Blue Zinc hardware
- Class 1, Division II, Groups A, B, C and D compliant
- NEMA Premium Efficiency
- Power Ratings from 0.33 to 3 HP
- Three Phase, 2 and 4 Pole
- 60 Hz (50 Hz Capable)
- 230/460V 60 Hz (Usable @ 208V)
- Totally Enclosed Fan Cooled (TEFC)
- Continuous (S1) Duty
- Ambient Temperatures up to 40°C
- Installation up to 3300ft
- Inverter Rated 15:1 Constant Torque (1.0 S.F. on VFD Power) per NEMA MG 1 Part 31
- Class F Insulation
- Designed to Class B temperature rise
- Vacuum Pressure Impregnated Stator
GR3-AL-TF-145T-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, Foot Mounted, Cast Aluminum, 145T Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
- NEMA Premium Efficiency
- Dual Voltage - Three Phase 230/460V
- 3600/1800/1200 RPM - 2/4/6 Pole
- Inverter Duty -15:1 Constant Torque (MG1 Part 31)
- Totally Enclosed Fan Cooled IP 55 Protection
- VPI Lap wound Stator with Anti-fungal Coating
- Double Lip Oil Seal on DE & ODE
- 1.25 SF - 143T and Up (1.15 SF - 56C Frame)
- 50 Hz Capable at 1.0 SF
- 40° C Ambient Temperature Rating
- 1045 Carbon Steel Shaft
- Multi-mount Frame with Removable Feet
- Oversized Drive End Bearing
- One-Way Brass Condensation Drains
- Aluminum Conduit Box 90° Rotatable
- Class F Insulation System with Class H Stator
- F1, F2, F3 Box Position Convertible ( Shipped F1)
- Class 1, Division 2, Group C & D Compliant
- Installation up to 3300 ft Altitude
- 36 Month Warranty from Purchase Date
GR3-AL-TF-145TC-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 145TC Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
- NEMA Premium Efficiency
- Dual Voltage - Three Phase 230/460V
- 3600/1800/1200 RPM - 2/4/6 Pole
- Inverter Duty -15:1 Constant Torque (MG1 Part 31)
- Totally Enclosed Fan Cooled IP 55 Protection
- VPI Lap wound Stator with Anti-fungal Coating
- Double Lip Oil Seal on DE & ODE
- 1.25 SF - 143T and Up (1.15 SF - 56C Frame)
- 50 Hz Capable at 1.0 SF
- 40° C Ambient Temperature Rating
- 1045 Carbon Steel Shaft
- Multi-mount Frame with Removable Feet
- Oversized Drive End Bearing
- One-Way Brass Condensation Drains
- Aluminum Conduit Box 90° Rotatable
- Class F Insulation System with Class H Stator
- F1, F2, F3 Box Position Convertible ( Shipped F1)
- Class 1, Division 2, Group C & D Compliant
- Installation up to 3300 ft Altitude
- 36 Month Warranty from Purchase Date
GR3-AL-TF-56C-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 56C Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
- NEMA Premium Efficiency
- Dual Voltage - Three Phase 230/460V
- 3600/1800/1200 RPM - 2/4/6 Pole
- Inverter Duty -15:1 Constant Torque (MG1 Part 31)
- Totally Enclosed Fan Cooled IP 55 Protection
- VPI Lap wound Stator with Anti-fungal Coating
- Double Lip Oil Seal on DE & ODE
- 1.25 SF - 143T and Up (1.15 SF - 56C Frame)
- 50 Hz Capable at 1.0 SF
- 40° C Ambient Temperature Rating
- 1045 Carbon Steel Shaft
- Multi-mount Frame with Removable Feet
- Oversized Drive End Bearing
- One-Way Brass Condensation Drains
- Aluminum Conduit Box 90° Rotatable
- Class F Insulation System with Class H Stator
- F1, F2, F3 Box Position Convertible ( Shipped F1)
- Class 1, Division 2, Group C & D Compliant
- Installation up to 3300 ft Altitude
- 36 Month Warranty from Purchase Date
GR3-AL-TF-90LB3-4-B-D-2, 2 HP, 1.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base Foot Mounted, Cast Aluminum, 90L Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
- IP 55 Rated Ingress Protection
- Inverter Rated-15:1 Constant Torque (MG1 Part 31)
- Double Lip Bearing Seal on DE & ODE
- VPI Lap Wound Stator with Tropicalization
- Dual Oversized Bearing on DE & ODE
- Multi-mount Removable Feet
- Corrosion Resistant Hardware
- Rubber Slinger Protection on Drive End
- Conduit Box is 90° Rotatable
- Zerk Regreasable Bearings 160 Frame & Larger
- F1, F2, F3 Field Convertible
- Class H Insulated Stator with Class F Leads
- Terminal Blocks between Conduit Box & Body
- Increase & Decrease Flanges Available
- One-Way Brass Condensation Drain on DE & ODE
- Class 1, Division 2, Groups A, B, C & D Compliant
- 36 Month Warranty
GR3-AL-TF-90LB34-4-B-D-2, 2 HP, 1.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base B14 Flange, Cast Aluminum, 90L Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
- IP 55 Rated Ingress Protection
- Inverter Rated-15:1 Constant Torque (MG1 Part 31)
- Double Lip Bearing Seal on DE & ODE
- VPI Lap Wound Stator with Tropicalization
- Dual Oversized Bearing on DE & ODE
- Multi-mount Removable Feet
- Corrosion Resistant Hardware
- Rubber Slinger Protection on Drive End
- Conduit Box is 90° Rotatable
- Zerk Regreasable Bearings 160 Frame & Larger
- F1, F2, F3 Field Convertible
- Class H Insulated Stator with Class F Leads
- Terminal Blocks between Conduit Box & Body
- Increase & Decrease Flanges Available
- One-Way Brass Condensation Drain on DE & ODE
- Class 1, Division 2, Groups A, B, C & D Compliant
- 36 Month Warranty
GR3-AL-TF-90LB35-4-B-D-2, 2 HP, 1.5 kW, 208-230/460V, 4P (1800 RPM), TEFC, Rigid Base B5 Flange, Cast Aluminum, 90L Frame, TECHTOP Premium Efficiency Metric IEC Electric Motor
Standard Features:
- IP 55 Rated Ingress Protection
- Inverter Rated-15:1 Constant Torque (MG1 Part 31)
- Double Lip Bearing Seal on DE & ODE
- VPI Lap Wound Stator with Tropicalization
- Dual Oversized Bearing on DE & ODE
- Multi-mount Removable Feet
- Corrosion Resistant Hardware
- Rubber Slinger Protection on Drive End
- Conduit Box is 90° Rotatable
- Zerk Regreasable Bearings 160 Frame & Larger
- F1, F2, F3 Field Convertible
- Class H Insulated Stator with Class F Leads
- Terminal Blocks between Conduit Box & Body
- Increase & Decrease Flanges Available
- One-Way Brass Condensation Drain on DE & ODE
- Class 1, Division 2, Groups A, B, C & D Compliant
- 36 Month Warranty
GR3-RS-OP-145T-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), 145T Frame, Rolled Steel, Rigid Base, Foot Mounted, Sealed Ball Bearing, TECHTOP NEMA Premium Open Drip Proof AC Motor
Standard Features
- Inverter Rated - 15:1 Constant Torque
- MG 1 Part 31 Compliant for VFD use
- IP 23 Rated - 40° Ambient Rating
- Double Lip Oil Seals on DE & ODE
- 1.25 SF up to 50HP ( 1.15 for larger frames )
- Vacuum Pressure Impregnated Winding
- Tropicalization Protection on Winding
- Corrosion Resistant Hardware
- 1045 Steel Shaft (through 326T), 4140 (360T and up)
- Zerk Regreasable Bearings 254 Frame & Larger
- Nipple Seals Between Conduit Box and Body
- Rubber Slinger
- Conduit Box is 90° Rotatable
- Class H Insulation with Class F Stator
- C & D Flanges Available
- 36 Month Warranty from Date of Purchase
GR3-RS-OP-145TC-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), 145TC Frame, Rolled Steel, C-Face, Foot Mounted, Sealed Ball Bearing, TECHTOP NEMA Premium Open Drip Proof AC Motor
Standard Features
- Inverter Rated - 15:1 Constant Torque
- MG 1 Part 31 Compliant for VFD use
- IP 23 Rated - 40° Ambient Rating
- Double Lip Oil Seals on DE & ODE
- 1.25 SF up to 50HP ( 1.15 for larger frames )
- Vacuum Pressure Impregnated Winding
- Tropicalization Protection on Winding
- Corrosion Resistant Hardware
- 1045 Steel Shaft (through 326T), 4140 (360T and up)
- Zerk Regreasable Bearings 254 Frame & Larger
- Nipple Seals Between Conduit Box and Body
- Rubber Slinger
- Conduit Box is 90° Rotatable
- Class H Insulation with Class F Stator
- C & D Flanges Available
- 36 Month Warranty from Date of Purchase
RD1-RS-TF-145T-4-B-C-2, 2 HP, 115/230V, 4P (1800 RPM), TEFC, Rolled Steel, 145T Frame, Rigid Base, Foot Mounted TECHTOP High Torque Single Phase AC Motor
Standard Features
- Manual Reset Protectors
- High Efficiency Dual Cap Design
- High Quality Molded Gaskets
- Over 300% Starting Torque
- Cast Iron End Bells
- Dual Oversized Ball Bearings
- Dependable Mechanical Starting Switch
- 18 Month Warranty
RD1-RS-TF-145TC-4-B-C-2, 2 HP, 115/230V, 4P (1800 RPM), TEFC, Rolled Steel, 145TC Frame, C-Face with Base, TECHTOP High Torque Single Phase AC Motor
Standard Features
- Manual Reset Protectors
- High Efficiency Dual Cap Design
- High Quality Molded Gaskets
- Over 300% Starting Torque
- Cast Iron End Bells
- Dual Oversized Ball Bearings
- Dependable Mechanical Starting Switch
- 18 Month Warranty
RD1-RS-TF-56H-4-B-C-2, 2 HP, 115/230V, 4P (1800 RPM), TEFC, Rolled Steel, 56H Frame, Rigid Base, Foot Mounted TECHTOP High Torque Single Phase AC Motor
Standard Features
- Manual Reset Protectors
- High Efficiency Dual Cap Design
- High Quality Molded Gaskets
- Over 300% Starting Torque
- Cast Iron End Bells
- Dual Oversized Ball Bearings
- Dependable Mechanical Starting Switch
- 18 Month Warranty
RD1-RS-TF-56HC-4-B-C-2-RND, 2 HP, 115/230V, 4P (1800 RPM), TEFC, Rolled Steel, 56HC Frame, C-Face Round Body, TECHTOP High Torque Single Phase AC Motor
Standard Features
- Manual Reset Protectors
- High Efficiency Dual Cap Design
- High Quality Molded Gaskets
- Over 300% Starting Torque
- Cast Iron End Bells
- Dual Oversized Ball Bearings
- Dependable Mechanical Starting Switch
- 18 Month Warranty
RD1-RS-TF-56HC-4-B-C-2, 2 HP, 115/230V, 4P (1800 RPM), TEFC, Rolled Steel, 56HC Frame, C-Face with Base, TECHTOP High Torque Single Phase AC Motor
Standard Features
- Manual Reset Protectors
- High Efficiency Dual Cap Design
- High Quality Molded Gaskets
- Over 300% Starting Torque
- Cast Iron End Bells
- Dual Oversized Ball Bearings
- Dependable Mechanical Starting Switch
- 18 Month Warranty
WX3-AL-TF-145T-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, Foot Mounted, Cast Aluminum, 145T Frame, TECHTOP Washdown Duty Electric Motor
Standard Features:
- IP 56 Rated Protection
- 50/60 Hz Capable
- 1.15 Service Factor
- 9 Lead Dual Voltage
- Fully Potted Conduit Entry
- Double Lip Oil Seals on DE & ODE
- Inverter Rated 15:1 Constant Torque for VFD use
- Multi-mount Removable Feet
- F1, F2, F3 Field Convertible (Shipped F1)
- Class F Insulation System ( Class H Stator)
- One-Way Brass Condensation Drains on DE & ODE
- Designed to Class B Temperature Rise
- Drive End Bearing Locks
- VPI Insulated Windings
- EISA Compliant
- 24 Month Warranty
WX3-AL-TF-145TC-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 145TC Frame, TECHTOP Washdown Duty Electric Motor
Standard Features:
- IP 56 Rated Protection
- 50/60 Hz Capable
- 1.15 Service Factor
- 9 Lead Dual Voltage
- Fully Potted Conduit Entry
- Double Lip Oil Seals on DE & ODE
- Inverter Rated 15:1 Constant Torque for VFD use
- Multi-mount Removable Feet
- F1, F2, F3 Field Convertible (Shipped F1)
- Class F Insulation System ( Class H Stator)
- One-Way Brass Condensation Drains on DE & ODE
- Designed to Class B Temperature Rise
- Drive End Bearing Locks
- VPI Insulated Windings
- EISA Compliant
- 24 Month Warranty
WX3-AL-TF-56C-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, C-Flange Mounted, Cast Aluminum, 56C Frame, TECHTOP Washdown Duty Electric Motor
Standard Features:
- IP 56 Rated Protection
- 50/60 Hz Capable
- 1.15 Service Factor
- 9 Lead Dual Voltage
- Fully Potted Conduit Entry
- Double Lip Oil Seals on DE & ODE
- Inverter Rated 15:1 Constant Torque for VFD use
- Multi-mount Removable Feet
- F1, F2, F3 Field Convertible (Shipped F1)
- Class F Insulation System ( Class H Stator)
- One-Way Brass Condensation Drains on DE & ODE
- Designed to Class B Temperature Rise
- Drive End Bearing Locks
- VPI Insulated Windings
- EISA Compliant
- 24 Month Warranty
GR3-CI-TF-145T-4-B-D-2, 2 HP, 208-230/460V, 4P (1800 RPM), TEFC, Foot Mounted, Cast Iron, 145T Frame, TECHTOP NEMA Premium Eff. Motor
Standard Features
- Inverter Rated - 15:1 Constant Torque
- MG 1 Part 31 Compliant for VFD use
- IP 55 Protection - 40°C Ambient Rating
- Dual Oversized Bearings
- 1045 Steel Shaft (through 326T), 4140 (326T & up)
- Multi mount Removable Feet through 326T
- One-Way Brass Condensation Drain
- 1.25 Service Factor to 50HP (1.15 for larger frames)
- Zerk Regreasable Bearings 254T & Larger
- Conduit Box is 90° Rotatable
- Double Lip Oil Seal on DE & ODE
- IVacuum Pressure Impregnated Varnish
- Tropicalization Winding Protection
- Nipple Seals Between Conduit Box & Body
- Rubber Slinger
- C & D Flanges Available
- Cast Iron Fan Covers Available on 364T & up
- Class F Insulation System with Class H Stator
- F1, F2, F0 Field Convertible ( Shipped F1)
- Class 1, Div 2, Groups A,B,C & D Certified
- EISA Compliant
- 36 Month Warranty from Purchase Date